3-Section Laundry Room Tops
We built this unusual U-Shaped countertop for a laundry room. The sink is integral and made from welded zinc. The room this top was installed in was very tight, with only one door and very limited access, and the countertop touched the walls on three sides. The installer specified diagonal unwelded corner seams to make this a 3-piece top, which made the project possible. All welded 16 gauge smooth zinc, natural hand rubbed highlight finish.
229"L x 25"W $10686 [Customize It]
Scroll Corner Wet Bar Top
We built this fabulous curved bar top to cover an antique French wet bar. The curved scroll corners and curved front profile define this graceful piece. The front edge is a 3 1/2 inch Jardins de Giverny edge, which transitions to a 2 inch Mes Amis edge at the rear. The dentil pattern on the center row of the edges provides a rich accent. All welded 16 gauge smooth zinc, natural hand rubbed highlight finish.
225"L x 28"W $26406 [Customize It]
Gull Wing Island
This small island counter top has simple features and an interesting shape. The outside edges overhang the cabinet to create an eating area. All welded 16 gauge smooth zinc, natural hand rubbed highlight finish.
93"L x 25"W $6606 [Customize It]
Long Reverse Hammered U-Top
This 16' U-shaped countertop shipped as a single piece. The Reverse hammering adds a touch of rustic texture. The framed opening in the center accommodates an undermount farm sink, and inline post caps add emphasis at the sink, making it a focal point. All welded 16 gauge reverse hammered zinc, natural hand rubbed highlight finish.
299"L x 25"W $18720 [Customize It]