Regular Price $12,759 Sale Price $6,379!(#5017)
191"L x 25"W $13187 [Click To Customize>>]
HALF PRICE SALE! Save over $6000!! This fully hammered copper countertop features an octagonal sink at the angled corner turn, and bronze clavos on the front edge. The left side is 98" and the right side is 93". Lengths can be cut to suit for an additional $500 each. 16 gauge copper, all random hammered, medium patina. We built this top and then our customer decided to make a major design change, so we gave him a trade-in at half the original price. Now we're passing this great deal along to you!
Regular Price $10,876 Sale Price $5,400!!(#5018)
92"L x 52"W $2518 [Click To Customize>>]
HALF PRICE! Save over $5,000!! This 52 1/2" x 90 1/2" reverse hammered zinc island features a framed opening for a large slide-in cook top. The large size of this top required a flat weld down the length of the deck which was a little visible. Our customer did not like the off-center location where we positioned the weld, so we built another island and took this one back. 16 gauge zinc, reverse hammered texture, natural finish. The reverse hammering obscures the weld, and overall this is an impressive countertop. We can reduce the length as needed for an additional $650.
Regular Price $23,000 Sale Price $9000!!(#5034)
Hood:55"L x 35"H Stack: 9"H Wall Mount $9000
Total Height: Hood+Stack 44" [Click To Customize>>]
More than half off! Save over $13,000!!
Dimensions are 55 3/8" L x 29" W x 34" H. We built this hood 1" larger, instead of 1" smaller, based on verbal instructions. Our mistake! The hood was too big to fit between the cabinets, so we made a new one for our customer. This high end hood features pewter front channels and a rectangular top crown to reinforce the straight line theme and to contrast with the angled pyramid shape. The finish is our random highlight over semi-gloss. The copper inner layer is visible at the rear, which is hidden behind the cabinet line. 14 Gauge pewter, smooth random highlight finish, double layer pewter over copper construction.
Regular Price $16,000 Sale Price $8000!!(#5035)
54"L x 54"H Wall Mount $8000 [Click To Customize>>]
Half Price as shown with pot rails and straps! Save $8000!
When we built this hood it twisted slightly at the top so that the top right rear corner does not touch the wall. This is easily handled with trim at the rear of the hood.
This fully hammered hood has a recessed bottom band. The band can accommodate a strap or can be left without a strap. 48 oz. copper, reverse hammered texture. Without the pot rails and straps, take off another $2000 for a total price of $6000.