102"L x 24"W $7711
This 2-station zinc lavatory top features an integral 57" long sink with smooth finish welded seamlessly into in the reverse hammered deck. The sink slopes to the rear center drain. All welded 16 gauge zinc, natural finish.
|
53"L x 24"W $3365
This very simple zinc alcove top features an integral zinc bar sink. Both the countertop and bar sink are smooth zinc. The front endge is our 1 5/8" Normandie channel edge, and the ends and back edge are raw. All welded 16 gauge smooth zinc, natural finish.
|
92"L x 35"W $4299
This top is ready to install. It comes bonded to 2 layers of 3/4" plywood substrate. Just drop in place, run screws, you're done! The zinc is thick, all-welded 16 gauge seamless construction with our natural highlight zinc finish and carnauba wax coating.
|
165"L x 31"W $11448
Our quarter roll Claire edge give this countertop a turn-of-the-century appeal. We followed the line of the cabinet, including post caps at the sink. The 3-sided framed opening is perfectly sized to fit the undermount sink by means of a template. Smooth, all welded 16 gauge zinc, natural finish.
|
148"L x 26"W $13425
This countertop features our ogee edge, post caps, and extended front. A 4-sided custom framed opening accomodates an undermount sink. Notches at both ends of the backsplash and an angle cut at the left end fit existing features of the room. Smooth all-welded 16 gauge zinc, natural finish.
|
48"L x 21"W $2161
This graceful lav top features an oval framed opening and a 1" splash. We templated the shape of the oval sink and matched it precisely. It's made from smooth 16 gauge welded zinc, and has a Natural finish with wax.
|
82"L x 25"W $3208
Reverse hammered texture gives this countertop a rustic appeal. The square cornered extended front covers corner posts on the cabinet front below. Reverse Hammered zinc, light patina.
|
102"L x 25"W $9248
Every surface of this countertop, sink, and drainboard is reverse hammered for a strongly rustic style. The left and front edges are raised for water control. The backsplash is coved at the deck for eady cleaning. The extra large sink with right hand drainboard provides ample working space for large items and a convenient place to drain. Reverse hammered zinc, medium antique patina.
|
85"L x 30"W $3805
A simple extended front and integral sink take this counter top to the basics. The square-cornered extended front covers a jog in the cabinet below. It's made from smooth 16 gauge zinc and has a Natural finish with hand rub.
|
49"L x 27"W $4804
This is a delightful bar prep countertop with dentil pattern detail on the bottom of our 2 1/4" Mes Ami Edge. The round framed allows use of an undermount bar sink. Short splashes protect the walls. The entire piece is made from smooth zinc, and has a natural hand rubbed finish.
|
62"L x 18"W $1233
This curvy edge is a showpiece of craftsmanship. The raw back and ends were covered with a stone splash, so the side walls extended past the front edge, making this top slightly recessed. It's made from smooth zinc and has a Natural finish with hand rub.
|
103"L x 21"W $8706
This piece has a raised marine edge, which combines with our classic Bistro edge to give this island bar top a solid, elegant presence. The marine edge controls spills, but also provides visual interest. It's made from smooth 16 gauge zinc, and has a Natural finish with hand rub.
|
72"L x 28"W $6399
This rectangular island top fits into a narrow space. Our integral cove trim under the curved Bistro edge makes an elegant transition to the cabinet below. The entire piece is made from smooth zinc, and has a Natural finish with hand rub.
|
26"L x 18"W $3459
Rich edge detail graces the front of this purse shelf. The quarter roll top edge of this countertop softens the look. This photo shows a very small top, only 26L x 18W. The edge height is 2 1/2 inches. Embossed edge patterns are available in hundreds of other patterns. Smooth zinc, light antique patina shown darkened after aging.
|
252"L x 26"W $10165
This extraordinary residential countertop is 21 feet long, and features a notched backsplash which accommodates a wide window that extends down right to the deck level. The sink is centered on the window. The entire piece is made from smooth zinc, and has a Natural finish with wax rub.
|  #4188
Zinc Countertop Mont St. Michel Extended Alcove
156"L x 22"W $6359
This counter top extends beyond the end walls of a long alcove. We accommodated the end walls with notches at each end. We also extended the length 1" on each end so that the Mont Saint Michel edge could continue around the front corners and terminate against the front of the alcove walls. It's made from smooth 16 gauge zinc, and has a Natural finish with hand rub.
|
 #4189
Zinc Countertop Marine Front Edge & Drink Rail
118"L x 28"W $4137
This top is a small commercial bar top with a drink rail at the rear. The marine edge keeps spills contained. The drink rail is fully welded and liquid-tight. Smooth welded 16 gauge zinc, natural finish with hand rub.
|  #3940
Zinc Countertop Italian Marine Edge
71"L x 26"W $3442
The substantial Italian marine edge on this top adds a good deal of mass. All sides are raised with a marine edge for outstanding water control. The rise at the rear keeps water out of the seam where the counter top meets the wall. It's made from smooth zinc, and has a Natural finish with hand rub.
|
 #4190
Zinc Countertop Extended Front W/ Framed Sink Opening
99"L x 31"W $4607
The extended front of this counter top is especially prominent, jutting out 5". We templated the undermount sink to capture the shape for the 4-sided framed opening. The entire piece is made from smooth 16 gauge welded zinc, and has a Natural finish with wax.
|  #3854
Zinc Countertop Waterfall Level Change
58"L x 26"W $5738
This counter top has a waterfall-style level change to another section of zinc counter top, which continues on to the right at the lower level. Both the counter top and the waterfall have substrate for support. In this installation, both sides of the waterfall are visible, so we added cladding on the back side. Seamless smooth 16 gauge zinc, natural highlight finish.
|
 #3857
Zinc Countertop Short Backsplash & Mont St. Michel Edge
53"L x 26"W $3228
This partial alcove countertop has splashes at the 3 adjoining walls. The substantial Mont St. Michele edge provides mass to this small countertop. Smooth zinc, natural finish with hand rub.
|  #3936
Zinc Countertop Stove End Countertop
45"L x 25"W $2630
This countertop was installed adjacent to a range. It includes an opening in the backsplash to accommodate a deck-level window. Smooth zinc, natural finish with hand rub.
|
 #2859
Zinc Countertop Alcove Prep Bar W/ Mont St. Michel Edge
86"L x 26"W $4721
This is an elegant top with a framed opening for an undermount bar sink. The decorative front edge provides interest. The entire piece is made from smooth zinc, and has a Natural finish with hand rub.
|  #4757
Zinc Countertop Felice Edge
67"L x 26"W $3972
Our 2/12" Felice edge is the perfect scale for this small alcove top. The integral sink is welded seamlessly into the deck. 16 Gauge zinc, natural finish.
|
 #5280
Zinc Countertop Straight Top With Integral Sink & Bistro Edge
115"L x 25"W $7007
This beautiful zinc countertop features our Bistro edge, which has a gap on the front to accommodate the shape of the customer's cabinets. It also has a backsplash that extends around from the front-left edge to the far right of the rear edge, and an integral zinc sink with 6 faucet holes. The entire countertop is completely smooth, and has a natural hand-rubbed finish.
|  #3371
Zinc Countertop Stand Up Eating Bar
90"L x 14"W $2425
We made 4 of these tops for a deli that wanted to add zinc eating bars at standing height around the perimeter of the dining area to increase serving capacity. They mounted these bars at 42 inches and equipped them with tall stools. The tall splash provides an easy-clean back surface that joins the deck with a sanitary seamless 3/4 inch cove radius. Smooth zinc, natural finish with hand rub.
|
 #4883
Zinc Countertop Marine Bistro Edge & Integral Sink
60"L x 18"W $6367
This custom zinc countertop has a raised bar area and an integral sink. It also has our marine-style "Bistro" edge, which helps contain liquids. It's made entirely from smooth zinc, and has a natural hand-rubbed finish.
|  #5120
Zinc Countertop Backsplash With Claire Edge & Circular Cutout
30"L x 26"W $3674
This custom zinc countertop features our "Claire" edge, and has a backsplash. It also has a circular sink cutout, and has a faucet hole. It's completely smooth, and has a natural hand-rubbed finish.
|
 #2735
Zinc Countertop Angled Peninsula W/ Framed Opening For Sink
187"L x 39"W $12673
An unusual sink shape required this custom framed opening. The left end is a wide passthrough which is open on front and back. The front edge also angles back from the sink to the left end. We custom built the curvy sink opening for a large ceramic sink. Smooth zinc, natural zinc with wax.
|  #2945
Zinc Countertop Very Long W/ Normandie Edges
152"L x 19"W $4311
A simple single piece counter top with Normandie edges and small splash that provides a water stop under a tile wall. The entire piece is made from smooth zinc and has a Natural finish. The finish produces a feathery highlight that is visible in direct lighting. Two layers of cabinet grade plywood are glued to the bottom of the zinc for stability and easy installation.
|