Call Us ! 1-800-755-0310
     Hello Guest ! (Log In)  


SIMPLE COUNTERTOP EDGES

Raw

  See Drawing

This edge is as basic as can be. It has no bends. Click the magnifying glass to see a close-up view!
Flat Turn-Down

  See Drawing

We bend the metal down at a 90° angle to make a simple flat edge. Click the magnifying glass to see a close-up view!
Normandie

  See Drawing

This edge has a return flange underneath. It's commonly known as a channel edge. It's available from 1/2" to 12" in height. Click the magnifying glass to see a close-up view!


Claire

  See Drawing

This edge features a 3/4" radius on the top, and a square bend on the bottom. Click the magnifying glass to see a close-up view!
Bullnose

  See Drawing

The shape of this edge is a half-circle. This rounded shape is 180°. Click the magnifying glass to see a close-up view!
Waterfall

  See Drawing

This edge can be any height, but the width is typically 1.5". Click the magnifying glass to see a close-up view!



  Also See Our Back Edges


  Also See Our Decorative Edges


Handcrafted Metal. (800) 755-0310
9322 Kneupper Lane. Converse, Texas 78109
sales@handcraftedmetal.com

Copyright © 2017. All rights reserved.