| Handcrafted Metal |
 |
| Copyright 2003 Handcrafted Metal, Inc. All Rights Reserved |
| Bullnose Information |
| This undermount apron sink features a 180 degree bullnose top on the apron. The top of the bullnose on this sink is positioned flush with the top of the sink. This sink does not extend to the wall behind. The back of the apron is set to touch the front of the cabinets, which are usually 24" width from the wall. The bullnose extends 1" forward of the apron front face. This means that the front tip of the bullnose normally works out to end 2" forward of the front of the cabinet when the apron is 1" thick. |
 |
| We regularly hammer or apply premium finishes to bullnose and radius top aprons. Normally we carry the finish up the apron and over the top of the bullnose radius all the way to the sink. We also put the finish on the ends of the apron and on top of the divider on double sinks. |
| We build another apron design that curves only 90 degrees. This design sets the face of the apron even with the front of the radius. |
 |
| Click on this photo to see a closeup view of a radius apron. |
 |