Zinc Door with Porthole Windows
This heavy duty restaurant front door is 48" wide and 83" tall. We fabricated the front and back fully welded seamless 16 gauge zinc shells, bonded them to the wood core, and then we continuously welded all of the joints to make the assembly completely seamless. The port hole windows are double sided glass with stainless steel flanges. This door weighed about 400 pounds, and mounted on heavy duty top and bottom pivot hinges that were recessed into the top and bottom edges of the door.
48"L x 83"W $12000 [Customize It]
Gold Swirl Old World Copper
Iridescent layers of color bring this large copper splash to life. Smooth 48 ounce copper, Gold Swirl Old World patina.
85"L x 45"W $3461 [Customize It]
Seamless Copper Hood Wall
This large copper wall splash system fits under cabinets, and beneath a hood. We cut the shape from a single sheet of copper using templates provided to us.
Medium patina and a smooth surface make this backsplash a classy wall finish behind a stove or under cabinets. This splash is a simple flat sheet with no edge bends or wood backer.
Medium antique patina with lacquer protective coat.
110"L x 36"W $1883 [Customize It]
This heavy gauge 48 ounce copper sheet is strong and easy to install. Medium patina and a smooth surface make this backsplash a classy wall finish behind a stove or under cabinets. This simple flat sheet installs directly to your wall using construction adhesive or contact adhesive. Medium antique patina with lacquer and carnauba wax protective coat.
60"L x 40"W $1436 [Customize It]
Door Panel w Straps
Lori's Bold Old World Finish Backsplash
This striking hood backsplash glows with color. The marbleized color veining is the artistry of our patina artist Lori. The hood above this splash has the same finish. The top, left, and right sides of this backsplash feature a raised frame that terminates with a step-out at the bottom edge. All welded 16 gauge copper, smooth copper.
60"L x 36"W $2501 [Customize It]
This pewter backsplash fits under cabinets at each end, and under a hood at the 2 center sections. Small Pewter U channel ribs cover the joints between sections. The finish is our semi-gloss with highlight. We mounted the soft pewter panels on wood backers for support and easy install. 14 Gauge pewter.
97"L x 20"W $8296 [Customize It]
Butterfly Pattern Wall Splash
Our delightful butterfly pattern on 16 gauge stainless.
65"L x 18"W $849 [Customize It]
Reverse Hammered Zinc Splash
Our rugged reverse hammered texture gives this wall splash a strong hand made quality. The substantial heavy-gauge zinc provides durability and makes this panel easy to install with construction mastic. Our medium patina darkens the low areas, and our lighter hand-rubbed highlight gives the high spots more contrast. 16 Gauge zinc.
96"L x 16"W $1098 [Customize It]